The roller consists of a 610x7 mm steel drum, which has to be filled with water to give additional weight. The roller is fitted with 100 mm knives so the overal diameter is 810 mm. MaxiCut can work of speeds between 18-25 km/h so an area of 10 hectares can easily be covered in an hour. Due to the high operating speeds and demands put on the machine the drum is fitted with 70 mm steel axles and large taper roller bearings with double lip seals. MaxiCut is a simple yet powerful alternative to a mulcher or topper. It has a high output and will have cost saving advantages due to the relatively low running costs.